Independent electrical safety audits and inspections for Victorian sites.
An electrical safety audit answers one question: if something went wrong tomorrow, could you show that your installation was safe and that you knew it? Energy Solutions iQ audits and inspects commercial, industrial and public electrical installations across Victoria and reports what a regulator would find.
We are licensed Electrical Inspectors and Auditors, and we are independent. We do not sell repairs, maintenance or equipment, so our findings are not shaped by what comes next.

The right audit for the question you need answered
Electrical safety audit
A whole-of-site review of the installation’s condition and the systems used to keep it safe.
Electrical compliance audit
A check of the installation and its records against AS/NZS 3000 and Victorian electrical safety law.
Independent electrical inspection
Physical inspection and testing of switchboards, protection, earthing and wiring by a licensed Electrical Inspector.
Thermographic inspection
Infrared scanning of switchboards and connections under load to find faults before they fail.
Renewable generation audit
Inspection and compliance review of solar, wind and battery installations.
Contractor and maintenance audit
A review of whether outsourced electrical work is being done, verified and recorded as your duty requires.
What an audit covers that routine testing does not
Test and tag checks portable appliances. A Certificate of Electrical Safety covers the specific work an electrician has just completed. Neither tells you whether the installation as a whole is safe, or whether you could prove it.
An independent audit looks at the fixed installation, the records behind it and the decisions made about it, then tests the parts that matter most.
Testing is not assurance. Verified evidence is.
Installation, records and decisions
- The physical condition of the installation
- Whether protection will operate when it should
- What has changed since it was last verified
- Who did the work and how it was checked
- Whether records would satisfy a regulator
- Which risks need action first
Electrical inspection and audit scope
- Main switchboards and distribution boards
- RCD and circuit protection testing
- Earthing and bonding
- Fixed wiring and final circuits
- Thermographic (infrared) scanning under load
- High-voltage and low-voltage systems
- Solar, battery and EV charging installations
- Outdoor and public-access equipment
- Contractor work and certificates of electrical safety
- Asset registers, maintenance records and test results
Findings are assessed against AS/NZS 3000 (the Wiring Rules), the Electricity Safety Act 1998 (Vic) and its regulations, and the way the regulator applies them in practice.
From first call to verified close-out
Scope the audit
We agree the sites, assets and questions that matter, and what a regulator, insurer or board would expect to see.
Inspect and test
Licensed Electrical Inspectors inspect and test the installation on site, with thermography where it adds evidence.
Classify the risk
Each finding is rated by consequence and likelihood, so urgent defects are separated from improvements.
Report and close out
You receive a regulator-aligned report and remediation plan, and we verify the fixes once your contractor has completed them.

Audited by people who used to lead the regulator’s audits.
Energy Solutions IQ is led by Michael Miskulin, who spent more than 14 years inside the Electrical Regulator leading audits, investigations and enforcement action, and contributing to standards development and regulatory strategy.
That experience shapes every audit: we look for what an investigator would look for, and we report it in a form a regulator, insurer or board can rely on.
Explore our electrical assurance services
Asset registers, lifecycle assurance and audit-ready evidence.
ExploreServiceElectrical Compliance VictoriaExploreServiceElectrical Expert Witness & Regulatory AdvocacyIndependent expert reports and advocacy for disputes, claims and investigations.
ExploreServiceElectrical Installation Inspection & Certification SupportLicensed inspection and certification of new and modified installations.
ExploreServiceGovernance, Policies & Competency FrameworksPolicies, accountability and competency that prove officer due diligence.
ExploreServiceIncident Preparedness & Regulatory Investigation ReadinessAudit-ready evidence and a clear plan before an incident or investigation.
ExploreServiceInspection, Testing & AssuranceLicensed, independent inspection and testing that produces regulator-grade evidence.
ExploreServiceRegulatory Assurance & ComplianceIndependent verification that your electrical compliance is defensible, not assumed.
ExploreServiceRisk-Based Electrical Systems ManagementCriticality-based inspection and maintenance with documented, defensible decisions.
ExploreServiceTechnology‑Enabled Risk & Situational AwarenessReal-time monitoring and dashboards that turn data into compliance evidence.
Explore- Electrical safety for Commercial Offices & Workplaces
- Electrical safety for Councils & Public Open Space
- Electrical safety for EV Charging Infrastructure
- Electrical safety for Public & Commercial Car Parks
- Electrical safety for Quick Service Restaurants
- Electrical safety for Schools & Early Learning
- Electrical safety for Service Stations & Fuel Retail
- Electrical safety for Sport & Recreation Facilities
- Electrical safety for Supermarkets & Retail
Electrical safety audits: common questions
What is an electrical safety audit?
An electrical safety audit is an independent review of an electrical installation and the way it is managed. It combines physical inspection and testing with a review of records, maintenance and contractor oversight, and reports whether the installation is safe and whether that could be demonstrated to a regulator.
Who can carry out an electrical safety audit in Victoria?
An electrical safety audit should be carried out by someone with the licence, technical competence and independence to assess the installation objectively. Energy Solutions iQ are licensed Electrical Inspectors and Auditors, authorised to carry out statutory and independent inspections under applicable legislation.
How often should a site be audited?
There is no single interval that suits every site. Frequency should follow risk: the age and condition of the installation, the environment it operates in, who has access to it and how often it changes. We set intervals by asset criticality, not habit.
What is the difference between an electrical audit and an electrical inspection?
An inspection examines and tests the physical installation. An audit includes inspection and also reviews the records, maintenance, contractor oversight and decisions behind it, so it shows whether safety is being managed as well as whether the equipment is sound.
Is test and tag the same as an electrical safety audit?
No. Test and tag checks portable appliances and leads. An audit covers the fixed installation: switchboards, circuit protection and RCDs, earthing, wiring and the equipment connected to it, along with the evidence that it is being kept safe.
How is an independent audit different from a Certificate of Electrical Safety?
A Certificate of Electrical Safety is issued for a specific piece of electrical installation work that has just been carried out. An independent audit looks at the condition of the whole installation and the records behind it, regardless of who did the work or when.
What does an electrical safety audit cost?
Cost depends on the number of sites, the size and complexity of the installation and the depth of testing required. We scope each audit with you first so the price reflects the work your sites need.
What do we receive at the end of an audit?
Independent inspection and test results, findings rated by risk, a prioritised remediation plan and an auditable record you can hand to a regulator, insurer or board.
Find out what an audit of your site would show.
Tell us about your sites and what is prompting the question. We will come back within one business day.
Assurance first. Done once. Done right.